Author Topic: The Indigo room (Read 76794 times)

Jubal · « **Reply #90 on:** September 10, 2008, 10:09:06 PM »

Nearly, but the bars are cylindrical with flattened ends, so they'd roll away and you'd slip.

stormcloud · « **Reply #91 on:** September 10, 2008, 11:05:50 PM »

what about my tippy toes technique (assuming i manage to land with my feet on nice non spiky tiles

stormcloud · « **Reply #92 on:** September 10, 2008, 11:07:21 PM »

or i use the table top as the bridge, using the metal frame to stand on and jump from

stormcloud · « **Reply #93 on:** September 15, 2008, 11:44:49 PM »

Has I failed so bad I killed this thread?

CN2 · « **Reply #94 on:** September 17, 2008, 08:09:33 PM »

Indeed

I think I have it.

Run in circles till the floor wears out and jump till it collapses?

Jubal · « **Reply #95 on:** September 17, 2008, 08:55:46 PM »

Basically you can't assume you land on good tiles (but if you can get down you can then tiptoe).

You're getting very close, but there are two vital ingredients you need...

stormcloud · « **Reply #96 on:** September 18, 2008, 11:04:58 AM »

I use the fridge to stand on and throw over the table top to jump onto

Jubal · « **Reply #97 on:** September 18, 2008, 05:39:06 PM »

YOU. CAN'T. MOVE. THE. FRIDGE.

CN2 · « **Reply #98 on:** September 18, 2008, 06:35:35 PM »

But why not,im sure if I wanted to I could... and it would make life so much easier

stormcloud · « **Reply #99 on:** September 18, 2008, 07:23:07 PM »

can you update the first post so I can see all of the things available without having to trawl through guesses?

Gmd · « **Reply #100 on:** September 19, 2008, 06:48:32 PM »

i dont know a way to complete this at all u said all things i can think of :unsure:

stormcloud · « **Reply #101 on:** October 03, 2008, 07:50:39 PM »

please please please can you put rooms with solutions into the first post *begs*

CN2 · « **Reply #102 on:** October 03, 2008, 08:07:58 PM »

With the table can you take the legs off, then jam them in the saw motor( the ones made of iron), then use the table as a bridge to cross the spikes?

Jubal · « **Reply #103 on:** October 03, 2008, 08:50:29 PM »

Sorry, I'll get this tidied up when I get round to it.

You need;

Chair (Room One)
Table
Iron Bars

CN2 · « **Reply #104 on:** October 03, 2008, 08:58:17 PM »

Hmm. Assuming the saw cannot slice through the iron bars, I replace the chair legs with them, then stick it in the saw to jam it. Then use the table as a bridge to the other side?

News:

Author Topic: The Indigo room (Read 76794 times)